Underwater Kinetics Home Safety Product 4AA Mini Q40 User Manual

 
4AA Mini Q40 eLED PLUS LIGHT  
Instructions & Important Information  
Bezel  
Thank you for purchasing this  
Underwater Kinetics Scuba  
Diving light. It utilizes the lat-  
est LED technology along  
with UK’s projection optics  
to provide you with reliable  
high efficiency lighting.  
Limited Lifetime Warranty  
UK International products  
are engineered for maximum  
performance and durability.  
All products carry a Limited  
Lifetime Warranty to the orig-  
inal retail purchaser to be  
free from defective material  
and workmanship under nor-  
mal and intended use. In  
addition, the UK International  
Limited Warranty covers  
materials used in its products  
to the original purchaser,  
from the date of purchase, as  
follows: plastics for 10 years;  
fabrics and rubber for 3  
years; rechargeable batteries  
for 90 days; and lamps for 30  
days (batteries and lamps  
are not manufactured by UK  
International).  
In the event the original  
retail purchaser detects a  
defect in the material or  
workmanship, the product  
along with proof of purchase  
date should be returned to an  
authorized UK International  
dealer or directly to UK  
International with the  
postage prepaid. UK  
International agrees to repair  
or replace at UK  
Lens  
(convex curve  
toward bezel)  
Batteries can vent hydrogen  
gas and possibly cause an  
explosion if they are (1)  
installed without the proper  
polarity, (2) not the same  
type, brand name and age  
or (3) completely  
14850  
eLED plus  
Lamp  
eLED Lamp Module  
For over a 30 years, UK has  
been designing and manu-  
facturing scuba lights to  
The eLED module is an inte-  
grated unit. There are no  
replaceable parts . In addi-  
tion to the LED itself, the  
module contains an electron-  
ic circuit which helps to  
maintain constant brightness  
as the batteries are dis-  
charged. Flashlights with  
standard filament lamps  
loose brightness steadily as  
the batteries are consumed.  
Module  
discharged.  
enhance the diving experi-  
ence. We believe that it is  
important to take at least one  
light on every dive just to see  
the incredible beauty that  
lies hidden in the shadows  
under coral and rocks. Our  
lights are the standard for  
scuba divers around the  
world. We have designed all  
of our lights to be incredibly  
bright, rugged, compact, and  
waterproof to at least 500  
feet. You can be assured that  
each light includes the latest  
technology and is the bright-  
est, smallest and most pow-  
erful in its class. With mini-  
mal care your Underwater  
Kinetics light will give you  
years of trouble-free service.  
>
Load batteries according  
to the diagram.  
Discard all batteries as  
soon as they are drained  
or no longer produce  
light.  
Do not mix batteries of  
different type, brand or  
age.  
>
Four  
Alkaline  
AA-Size  
(LR6)  
Batteries  
>
Care and Maintenance  
Keep area around the  
O-ring clean.  
Beam In And Out-Of-Water  
The front element of the  
Projection Optics System  
allows the 13° out-of-water  
beam angle to expand to  
almost 20° in-water for  
hotspot free illumination of  
close-up subjects. The high  
color temperature or daylight  
quality of the light beam  
allows light to travel farther  
underwater, due to less  
absorption than that which  
occurs with light from stan-  
dard filament lamps.  
If the light floods, empty it  
immediately, rinse with  
fresh water and dry com-  
pletely before reassembly.  
Note:  
The Mini Q40 eLED  
Plus will not light if  
the batteries are not  
inserted with the  
polarity as shown.  
O-Ring  
Replace the  
reflector/lamp, which con-  
tains a hydrogen absorbing  
catalyst, if it gets wet.  
Battery Installation  
To install batteries, hold the  
case in the position shown.  
Drop the batteries one by  
one into the case in the order  
shown. Make sure that the  
(+) end of the battery is down  
for 1 and 2 and up for batter-  
ies 3 and 4. Next insert the  
lamp module into the case.  
Place the bezel over the lamp  
module and screw it onto the  
case.  
International' sole discretion  
any product found to be  
defective in material or work-  
manship within the time peri-  
od specified above. For the  
complete Limited Lifetime  
Warranty write to UK  
Do not store batteries in  
the light for long periods of  
time; they may leak and  
damage the light.  
O-Ring Seal  
The O-ring and sealing sur-  
faces must be kept clean and  
lubricated with silicone  
grease in order to maintain  
the watertight seal and  
smooth rotation of the bezel.  
During cleaning remove the  
O-ring with your fingers. Do  
not use tools which can dam-  
age the O-ring and sealing  
surfaces.  
International.  
Address all correspon-  
dence and returns to:  
MQ40 eLED Plus stays bright  
ON / OFF  
UK International  
13400 Danielson Street  
Poway, CA 92064  
To operate the Mini Q40 eLED  
Plus screw the bezel down  
by twisting clockwise until  
the lamp comes ON. Turn the  
light OFF with at least 1-1/2  
counter-clockwise turns of  
the bezel.  
Mini Q40  
eLED Plus Case  
©2006 UK International  
400135 rev. 9/15/06  
 

Tascam Speaker VL M3 User Manual
Technicolor Thomson DVD Player IB5000 User Manual
Technics Stereo System SC CH900 User Manual
Telenetics Network Card Modular Nest User Manual
Texas Instruments Computer Hardware SPRAA56 User Manual
Transition Networks Network Card E FL RED MC01SMA User Manual
UMAX Technologies Scanner e3420 User Manual
Verizon Telephone 5ESS User Manual
Wachsmuth Krogmann Carpet Cleaner VC9385S User Manual
Weed Eater Lawn Mower 186913 User Manual