Tokina Security Camera APT 641 User Manual

TOKINA Co.,Ltd.  
Security Products Division  
120-4 NOZUTA-MACHI,MACHIDA-SHI,  
TOKYO, 195-0063 JAPAN  
TEL:+81-42-734-8912 FAX:+81-42-736-0143  
APT-641 Speed dome controller  
SPECIFICATION  
Video Input  
Video Output  
LCD Display  
Alarm Input  
Preset  
8 CAMERA INPUT and EACH THROUGHOUT  
MAIN OUTPUT/SPOT OUTPUT  
16 x 2 Display  
up to 8 Inputs  
64 Preset Points  
OSD Display  
Function Key  
Focus  
MENU and CAMERA ID (up to 10 characters)  
AUTO/AUTO PAN/SWITCHER  
NEAR/FAR  
Joystick  
VSD-640  
External Units/PC  
Power Source  
Power Consumption  
Weight  
PAN/TILT/ZOOM Simultaneous Control  
RS-485 Communication Interface  
RS-232 Communication Interface  
DC 12V (500mA)  
6W  
2kg  
Dimensions  
345(W)x67(H)x206(D)mm  
* Specifications and design subject to change without notice for improvements.  
Front Panel Front Panel Controls  
1. LCD DISPLAY  
This presents the setting state.  
2. KEYPAD BUTTON  
This button is used to control PRESET and CAMERA.  
3. CLEAR  
This button is a STOP function button.  
4. ENT  
This button is a ENTER button that selects PRESET and CAMERA.  
Besides this button is used the button selects cameras of external unit.  
5. PRESET  
This button is a PRESET button that selects preset positions.  
6. CAM  
This button is a CAMERA button that selects cameras and  
applys switcher function.  
7. REW  
This button is a REWIND button for AUTO/AUTO PAN.  
8. FF  
This button is a FORWARD button for AUTO/AUTO PAN.  
9. AUTO  
This button is AUTO Sequence and SWITCHER button.  
10. AUTO PAN  
This button is AUTO PAN button.  
11. FAR  
This button is a Far button for manual focus.  
12. NEAR  
Rear Panel Rear Panel Controls  
1. VIDEO INPUT JACKS  
This button is a NEAR button for manual focus.  
13. MENU  
This jack is used as video input jacks up to eight video inputs.  
2. EACH THROUGH OUTPUT JACKS  
This jack is a Throughout jack of each video input.  
3. VIDEO OUTPUT JACKS  
This button is a MENU button for OSD Display.  
Be sure to push the button over 3 sec to operate MENU.  
14. CAM SW/IR  
This jack is used as the output of video input.  
Outputs consists of two outputs, AUTO and SPOT output.  
4. ALARM INPUT TERMINALS  
This button is CAM SW button for VRX-2201 and IR button.  
15. LIGHT/WDR  
This button is LIGHT button for VRX-2201 and WDR button.  
16. AUX  
This terminal is used as ALARM inputs.  
5. RS-485 TERMINAL  
This button is an AUX button for VRX-2201.  
17. LOCK  
This terminal is used as RS-485 Communication.  
6. PC  
This button is a LOCK button for preventing the preset setting from mishandling.  
Be sure to push the button over 3 sec to operate LOCK.  
18. JOYSTICK  
This D-SUB Jack is used to control this unit by PC.(OPTION)  
7. EXTERNAL UNITS  
This D-SUB Jack is used to connect the external unit.  
8. DC POWER JACK  
This is a Joystick that manually controls PAN/TILT/ZOOM.  
19. POWER SWITCH  
This jack is a DC Power jack, DC 12V.  
This switch is a POWER ON/OFF button.  
 

Technicolor Thomson MP3 Player PDP2325 User Manual
Tektronix Power Supply 501 1 User Manual
Topfield Cable Box TF 100 C User Manual
Toshiba Flat Panel Television 27HL95 User Manual
Troy Bilt Tiller 12209 User Manual
U Line Refrigerator CO1175 User Manual
USRobotics Switch 24 Port 10 100 User Manual
ViewSonic Projector PJ406D User Manual
VTech Handheld Game System A DAY IN THE LIFE OF SPONGE User Manual
Vulcan Hart Electric Steamer F 32561 User Manual